About the IBC Tipper Unit
The IBC Tipper is a mechanism to maximise the dispensing of your IBC while avoiding waste, environmental and safety hazards. It can be used on it’s own or can be customised with options as shown below.
The IBC Tipper works by tilting the IBC as it’s contents are used, thereby increasing pressure at the tap and allowing more liquid access to flow out. Depending on the value of the liquid, this could redeem significant losses through waste quickly, and with little fuss. You can use the calculator on our homepage to work out how much you could save.
The unit and any optional extras will be provided in steel, and painted in a durable dark grey gloss finish. If you require the a different final colour, please contact us prior to order and this can be arranged.
Postage to the Mainland UK costs a flat rate of £60.00, regardless of order quantity. We manufacture Tippers to order and turnaround time is usually within 10 days (please allow 14 days including delivery).
International postage is available and we have shipped IBC Tippers all over the world. You can contact us for a shipping quote either before or after you have placed an order.
This is dependent on the viscosity of the liquid being drained and the shape of the IBC at the outlet. There may still some leftover liquid, but it will usually be significantly less than if an IBC Tipper had not been used.
Yes, the combination of castors and stand have been carefully designed to allow for the movement of a full IBC without the need for a forklift truck. This is subject to the surface across which it is being moved being suitable.
As standard we produce the units with two lockable castors and two free castors. If you have specific requirements, we can tailor the IBC Tipper to them.
Please contact us - we can usually arrange for a trial unit to be supplied to prove that a Tipper is suitable for use with your liquids.
Yes, the IBC Tipper complies with all essential requirements of the relevant European health, safety and environmental protection legislation, and therefore holds a CE marking. Each IBC Tipper has a small sticker with the CE Mark on.
The tipper sits at 5 degrees of tilt as standard. We can also provide them at 8 degrees of tilt but this makes it difficult to load from the side.
Yes, we can include a second frame to double the height of the springs making the tipper tilt up to 15 degrees. This makes the frame 60mm taller when flat but makes it difficult to load from the side (it is still easy to front load). Please contact us if you would like to discuss this further.